$
Pound Sterling
CA Dollar
AU Dollar
Euro
NZ Dollar
Malaysian Ringgit
Philippine Peso
Singapore Dollar
South African
Danish Krona
Hong Kong Dollar
Indonesia Rupiah
Mexican Peso
Norwegian Kroner
Swedish Krona
Swiss Franc
UAE Dirham
CzechKoruna
Türk Lirası
Indian Rupee
Brazillain Real
Japanese Yen
Simplify dispensing water on select refrigerators with interior water dispensers with this Water Dispenser Lever - Type II & Type III. Press a cup against the water drop icon on the lever to activate the water dispenser. Compatible with select GE refrigerators that have an interior water dispenser. Make sure your water dispenser looks identical to the one in the listing photos to ensure compatibility.
Please see important disclaimer at the end of this description.
Not the correct style? I also make a similar item compatible with other refrigerators:
Water Dispenser Lever - Type I:
Note: This is a new design that has not had extensive testing. Please install and use with caution. If you have any issues with the item, please provide feedback. I am able to modify the design and provide replacements to fix any issues.
Installation is simple and requires no tools. See the short video in the listing photos for reference. Installation instructions with photos will be included with your purchase.
Installation Steps:
1. Remove the old water dispenser assembly by hand by lifting up on the bottom and pulling outward. Avoid using tools that could scratch the refrigerator.
2. (Type II only) Ensure the wires and wire connectors are tucked into the back of the dispenser cavity (as shown in the included instructions).
3. Fully insert the dispenser tube through the hole in the back of the new Water Dispenser Lever.
4. Push the top of the new Water Dispenser Lever against the wall of the refrigerator and slide up to engage the top clips.
5. Hinging from the top clips, rotate the bottom of the new Water Dispenser Lever against the wall of the refrigerator. Apply enough pressure on the new Water Dispenser Lever until the bottom clips engage.
Note: The dispenser tube should extend slightly from the new housing.
CAUTION: AFTER INSTALLATION, MAKE SURE THAT THE WATER DISPENSER DOES NOT ACTIVATE WHEN THE REFRIGERATOR DOOR IS SHUT.
Troubleshooting (Type II only): After installation, if the lever does not activate the dispenser or it takes excessive force to activate the dispenser, apply the included adhesive backed spacer strip as directed to fix this issue.
This item is 3D printed and may have minor surface blemishes as a result.
Have something that could be fixed with 3D printing? Send me a message and I can make a custom order that fits your needs!
Disclaimer: The parts sold for modifying refrigerator water dispensers are intended for use at your own risk. Modifying your appliance may result in unforeseen issues, such as leaks, spills, or damage, and could potentially void the manufacturer's warranty. It is essential to ensure proper installation and test the system for leaks before regular use. We strongly recommend following all safety guidelines and regulations during installation. By purchasing and using these modification parts, you acknowledge that any risks associated with their installation and use, including potential water damage, are your sole responsibility. We are not liable for any damage, injury, or warranty issues arising from the use of these products.
Please see important disclaimer at the end of this description.
Not the correct style? I also make a similar item compatible with other refrigerators:
Water Dispenser Lever - Type I:
Note: This is a new design that has not had extensive testing. Please install and use with caution. If you have any issues with the item, please provide feedback. I am able to modify the design and provide replacements to fix any issues.
Installation is simple and requires no tools. See the short video in the listing photos for reference. Installation instructions with photos will be included with your purchase.
Installation Steps:
1. Remove the old water dispenser assembly by hand by lifting up on the bottom and pulling outward. Avoid using tools that could scratch the refrigerator.
2. (Type II only) Ensure the wires and wire connectors are tucked into the back of the dispenser cavity (as shown in the included instructions).
3. Fully insert the dispenser tube through the hole in the back of the new Water Dispenser Lever.
4. Push the top of the new Water Dispenser Lever against the wall of the refrigerator and slide up to engage the top clips.
5. Hinging from the top clips, rotate the bottom of the new Water Dispenser Lever against the wall of the refrigerator. Apply enough pressure on the new Water Dispenser Lever until the bottom clips engage.
Note: The dispenser tube should extend slightly from the new housing.
CAUTION: AFTER INSTALLATION, MAKE SURE THAT THE WATER DISPENSER DOES NOT ACTIVATE WHEN THE REFRIGERATOR DOOR IS SHUT.
Troubleshooting (Type II only): After installation, if the lever does not activate the dispenser or it takes excessive force to activate the dispenser, apply the included adhesive backed spacer strip as directed to fix this issue.
This item is 3D printed and may have minor surface blemishes as a result.
Have something that could be fixed with 3D printing? Send me a message and I can make a custom order that fits your needs!
Disclaimer: The parts sold for modifying refrigerator water dispensers are intended for use at your own risk. Modifying your appliance may result in unforeseen issues, such as leaks, spills, or damage, and could potentially void the manufacturer's warranty. It is essential to ensure proper installation and test the system for leaks before regular use. We strongly recommend following all safety guidelines and regulations during installation. By purchasing and using these modification parts, you acknowledge that any risks associated with their installation and use, including potential water damage, are your sole responsibility. We are not liable for any damage, injury, or warranty issues arising from the use of these products.
